pradeep3037
March 8th, 2009, 12:27 PM
Follow this simple procedure to port forward your UT300R2U modem and get full speed while downloadin from torrents
1) Login to modem by typing 192.168.1.1 in your browser (login id and passwd are both "admin")
2) In the left side menu click Advanced setup
3) Click on NAT next and DMZ Host thereafter
4) Enter DMZ host ip address as
i) 192.168.1.2 if you are connected through ethernet
ii) 192.168.1.1 if you are connected through USB
5) Click on save/apply
6) Click on Management in the left side menu
7) Select Save/Reboot from that and leave your browser like that until it displays the summary page (this takes about 2-3mins)
From now on your modem will accept incoming peers and torrents work faster than before.
1) Login to modem by typing 192.168.1.1 in your browser (login id and passwd are both "admin")
2) In the left side menu click Advanced setup
3) Click on NAT next and DMZ Host thereafter
4) Enter DMZ host ip address as
i) 192.168.1.2 if you are connected through ethernet
ii) 192.168.1.1 if you are connected through USB
5) Click on save/apply
6) Click on Management in the left side menu
7) Select Save/Reboot from that and leave your browser like that until it displays the summary page (this takes about 2-3mins)
From now on your modem will accept incoming peers and torrents work faster than before.